Timer Start Mode; Cold/Hot Start Mode; Remote Coding / Programming Routine; Programming 2 Way 5 Button Remotes - Firstech, LLC. 2W902R-SP Manual De Usuario

If you are not using the RPS unlock, following the below procedures to program your secure valet pass
code;
STEP 1: Turn on Option 3-10-III. (Dealer programmed option)
STEP 2: Turn ignition key to the "on" position.
STEP 3: Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash
rapidly with successful completion of this step.
STEP 4: Enter the first digit of the desired two digit pass code by depressing the switch the number of
times that coordinates with the desired first number. For example, to enter 3, depress the switch 3 times,
then wait.
STEP 5: The LED will confirm the first number by flashing BLUE slowly. Once the LED begins to flash
rapidly, enter your second number by repeating step 4.
STEP 6: Turn the ignition off - the Secure Valet Switch is now programmed. Follow steps 3 – 5 to enter
your Secure Valet code.

Timer Start Mode

Timer start mode is used to cool or warm the vehicle automatically without use of the key or
the remote. While engaged, timer start will activate even while the remote is out of range.
Tap the Function + Key/Start buttons <insert icons> for a half second to activate timer start mode. The
remote will beep once and LED flash once. Repeat the same step to turn off timer start mode. Timer start
mode will be cancelled any time the vehicle is started manually or remotely. To change from the default
setting to optional settings, see your place of purchase.

Cold/Hot Start Mode

Cold/hot start mode works in conjunction with timer start mode (see above) and the temperature sensor.
It allows you to configure your timer start feature to check the vehicle's temperature prior to starting. All
of these options require programming from your local dealer.
Anti Jacking Mode
Your system has a mode that requires you to keep your remote separate from your key chain. This
feature also requires additional labor. Please consult your installer for more details. The Anti Jacking
mode allows you to safely disable your vehicle once a thief has driven off with your property. If you are
car jacked and still have your remote, you can panic the system by holding the Lock button <insert icon>
down for 4 seconds. The siren will sound for 30 seconds and the vehicle will shut down.
More Optional Sensors
If you purchased an Alarm or Alarm and Remote Start system you have the ability to add optional
sensors from Firstech. You have the ability to protect your investment by adding a battery back up
system to protect main power to your alarm or a tilt sensor to protect expensive rims and tires.

Remote Coding / Programming Routine

IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All
remotes must be coded at the same time.

Programming 2 Way 5 Button Remotes:

15