EN
ous. The manufacturer may not be held liable for any damages caused by improper, incorrect
or unreasonable use.
22.
Do not use to vacuum hot ash, large pieces of glass, rubble, sharp or pointed items or liquids.
23.
To prevent dangerous overheating, always unwind the power cord fully and unplug the appliance
from the mains when the appliance is not in use.
24.
Never use the appliance without a bag or motor filter or if the bag or filter are broken or damaged.
25.
Never use the appliance on wet surfaces.
26.
Never suck up liquids.
27.
Never use the appliance with bare feet.
28.
Only carry the vacuum cleaner by the special handle. Never pull it or carry it by the power cord
or hose.
29.
Keep hair, loose clothing, fingers and all other body parts well away from open and moving parts
on the appliance.
30.
To dispose of product correctly according to European Directive 2009/96/CE, please refer
to and read the provided leaflet enclosed with the product.
DO NOT THROW AWAY THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (Fig. 1)
A
Dust container handle
B
Foot-operated cord rewinder button
C
Appliance body
D
Suction device coupling
E
Dust container
F
Foot-operated on/off switch
G
Small suction device
H
Suction hose
ATTACHMENTS
Telescopic tube (P)
Insert the extension tube onto the handle and then fit the required attachment.
Once the attachment has been fitted, it is possible to extend the telescopic tube using the lever (FIG.
4) to move it to the required length. Release the lever to stop the tube in the required position.
Floor brush (I)
- Ideal for cleaning large areas as well as corners that are difficult to reach.
- We advise against using the brush to clean carpets and resistant floors. The brush has wheels to allow
it to glide over all surfaces. Select the required projection for the bristles by pressing the lever at the
end of the brush. To retract the bristles, press the lever marked with the
- For better preservation and protection of smooth flooring such as PVC, parquet or tiles, it is better
to use the brush. To lower the bristles, press the lever marked with the
symbol.
I
Floor brush
L
Hard floor / carpet selector switch
M Manual air intake valve
N
Handle
O
Slider device
P
Telescopic tube
Q
Narrow suction nozzle with brush
- 8 -
carpet symbol
smooth flooring