Kohler K-R22899-SD-CP Manual De Instrucciones página 13

Sensor
Handle
LED
Faucet Operation
Rotate the handle outward to the open position to start water
flow. The handle LED will illuminate to indicate that the sensor is
functioning.
Adjust the handle to the desired water temperature.
Wave your hand under the spout to turn the water OFF.
Wave your hand under the spout again to restart the water flow.
NOTE: Some objects that are clear and certain colors are not
detectable by the sensor. Always use your hand for sensor testing.
If needed, refer to the "Handle LED Adjustment" section for more
information.
NOTE: For extended periods of nonuse, return the handle to the
closed (upright) position. The handle LED will turn OFF, indicating
that water flow is not available.
LED Indicators
Handle LED: Illuminates when the sensor is active.
Power LED: Indicates that there is power to the circuit board.
LED Color Indicators
Red LED: System is ready for setup.
Flashing Red LED: Setup was not completed in time. System will
need to be reset.
Kohler Co.
Manual
Override
Open
Position
13 1387795-2-B