Technical Data; Definitions: Safety Guidelines - BTI PS 1800+ Manual Del Usuario

CROSSCUT MITRE SAW
BTI PS 1800+
Congratulations!
You have chosen a BTI tool. Years of experience, thorough
product development and innovation make BTI one of the
most reliable partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
LED
Power input
Blade diameter
Blade bore
Max. blade speed
Mitre (max. positions)
Bevel (max. positions)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
mitre 48°
bevel 45°
bevel 48°
Overall dimensions
Weight
Noise values and vibration values (triax vector sum) according to EN61029:
L (sound pressure)
PA
L (acoustic power)
WA
K (acoustic power uncertainty)
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
BTI PS 1800+
V 230
V 230/115
1
Yes
W 1800/1600
mm 216
mm 30
min -1 6300
left and right 50°
left 48°
bevel 45°
mitre 45°
mm 60 × 270
mm 60 × 190
mm 60 × 180
mm 48 × 270
mm 45 × 270
mm 460 × 560 × 430
kg 15.0
dB(A) 93
dB(A) 104
dB(A) 3.9
m/s² 2.1
m/s²
1.5
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
Fuses
Europe
U.K. & Ireland
U.K. & Ireland
NOTE: This device is intended for the connection to a power
supply system with maximum permissible system impedance
Zmax of 0.28 Ohm at the interface point (power service box) of
user's supply.
The user has to ensure that this device is connected only
to a power system which fulfils the requirement above. If
necessary, the user can ask the public power supply company
for the system impedance at the interface point.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Denotes sharp edges.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
ENGLISH
29