auna multimedia MC-20 Manual Del Usuario página 42

EN
42
Secondary services
If the symbol ">" appears next to the name of a channel on the screen,
this indicates that secondary services are available for that channel.
These secondary services include additional services related to the main
broadcaster, such as sports broadcasters who wish to add additional
commentary. These secondary services are displayed directly after the main
channel in the channel list. To select a secondary channel, press the MENU
key as soon as the ">" symbol is displayed. When the secondary service is
finished, the unit will automatically switch back to the main station.
Stored stations (only available on the remote control)
1. Press and hold the MEMORY button. The screen will show "save to P".
2. Press the CH+ or CH- buttons to select the desired memory location for
a station. Finally, press the ENTER button to confirm.
3. The station will be saved within a few seconds and the screen will show
"Station saved".
Calling up a stored station (only available on the remote control)
1. Once you have assigned a station to a memory location, you can recall
it by pressing the MEMORY button.
2. Press the CH+ key until the station you want is displayed on the screen.
Press the ENTER key to start playback of the station.
DAB INFO modes
When you press the INFO button on the remote control, the screen
will cycle through the following display modes. The information of the
respective display mode is shown in the lower section of the screen.
Signal strength
The screen shows a bar indicating the signal strength. The stronger the
signal, the longer the bar (seen from left to right).