Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

SETTINGS

Automatic time setting
The time can be updated automatically when you receive a DAB+ signal at
your current location. Place the unit near a DAB+ signal for a short time so
that it automatically sets the current local time.
Manual time setting
1.
In standby mode, press the time setting button on the remote control.
The hour indicator will start flashing on the screen.
2. Press the or buttons to adjust the hour display and then press
the time setting button to confirm. The minute display will then start
flashing.
3. Press the or buttons to adjust the minute display and then press the
time setting button to confirm.
4.
The current time is now set.
Note: If you cannot receive a DAB+ signal, you can set the time manually.
As soon as a DAB+ signal is received, the unit automatically updates the
time.
Setting the alarm
1.
Press and hold the TIMER button on the remote control until the display
shows "Timer on" and the digital digits start flashing.
2. Press the or buttons to adjust the hour display and then press the
TIMER button to confirm. The minute indicator will then start flashing
on the screen.
3. Press the or buttons to adjust the minute display and then press the
TIMER button to confirm.
4. When you have set the desired alarm time with the or  buttons, the
screen will display "Timer off" and the hour indicator will start flashing.
5. Press the or buttons to adjust the hour display and then press the
TIMER button to confirm. The minute indicator will then start flashing
on the screen.
EN
37
Tabla de contenido
loading

Este manual también es adecuado para:

1003137010031371

Tabla de contenido