Dab+ Operation - auna multimedia MC-20 Manual Del Usuario

EN
40

DAB+ OPERATION

When the mains plug of the unit is inserted into the mains socket and
the unit is switched on for the first time from standby mode, the unit will
automatically switch to DAB mode and start an automatic station search.
During the search, the "Search" screen will display a bar showing the
current progress of the search and the number of stations already found. As
soon as the search is finished, the unit will select the first alphanumerically
found station. To explore the stations found, press the or buttons.
Full channel scan
During the first complete station search, all DAB+ Band III stations are
searched. After the search is finished, the first alphanumerically found
station is automatically selected.
1. To activate the automatic channel search, press the search button and
the screen will display "Search..." and a bar that increases in size.
2. All stations found are automatically stored. To explore the stations
found, press the or buttons. Then press the ENTER button.
Manual station search
In addition to the automatic channel search, the channel search can also be
performed manually. This can help you when aligning the antenna or adding
stations that were omitted during the automatic station scan.
1. Press the MENU button on the remote control to display the menu.
2. Press the ENTER key to select the manual channel search.
3. Press the buttons or to explore the DAB+ stations numbered from 5A
to 13F.
4. After selecting the desired channel number, press ENTER to confirm.
The screen will display the multiplex.
5. Press the MENU button again to add the selected channel to the
channel list.