Safety Instructions; General Information; Safety Instructions For Assembly - GRASS SENSOMATIC Manual Del Usuario

SENSOMATIC
2.0

Safety instructions

2.1

General information

The electro-mechanical GRASS Sensomatic drawer system is a state-of-the-art system complying with the appli-
cable EU standards and general accident prevention regulations. Certain risks, however, remain in case of non-
compliance with these operating instructions. GRASS GmbH does not accept any liability or claims under warranty
for damage or subsequent damage resulting from noncompliance with these operating instructions.
The Sensomatic drive units are subject to the regulations of the Machinery Directive 2006/42/EC (MD for short).
The Grass Sensomatic is a complete machine - see the Machinery Directive guidelines (edition 2.2.) The requi-
rements of the Machinery Directive are fulfilled by the Grass Declaration of Conformity if the Sensomatic unit is
installed in furniture in compliance with the current Grass specifications (catalogue, operating instructions, assem-
bly instructions). If the furniture deviates from these specifications, the party placing the furniture on the market
must ensure its conformity.
The scope of the Machinery Directive covers distribution within the European Economic Area (EEA), Switzerland,
Turkey and Northern Macedonia. The requirements of other countries are covered by certifications.
2.2

Safety instructions for assembly

GRASS Sensomatic opening systems may only be assembled by trained specialists with the help of these
„
assembly instructions.
All work must be performed whilst disconnected from the electrical supply.
„
Adhere to national regulations and standards when assembling Sensomatic system.
„
GRASS GmbH excludes all liability for unauthorised changes to GRASS Sensomatic opening systems and
„
any resulting damage.
GRASS GmbH provides a warranty only for the drawer and slide systems Nova Pro, DWD XP and Dynapro.
„
However GRASS GmbH cannot accept any liability for combinations with products of other manufacturers.
Use only genuine GRASS parts for repairs and maintenance.
„
The system must be connected to the power supply by a qualified electrician.
„
When sawing in the vicinity of GRASS Sensomatic systems, ensure that no sawdust gets into the drive unit
„
or into the guide rails.
It must be possible to isolate the opening system, e.g. using switchable sockets. Prior to changing the power
„
supply unit or the opening unit, the system must be isolated.
Do not squeeze cables or allow them to come into contact with moving parts.
„
The power supply unit must be easily accessible.
„
Ensure that no moisture can enter the power supply unit.
„
Do not use damaged parts.
„
When the power supply unit is connected, the extension arm moves to the home position.
„
24 Translation of the original operating instructions