Cleaning And Care Instructions - CRATONI Rearlight Modo De Uso

USER INSTRUCTIONS: LED REARLIGHT [I]
1. BEFORE USING IT FOR FIRST TIME
Remove the safety strip from the LED rear light before using it for the first time.
2. REMOVING AND ATTACHING THE REAR LIGHT
• Carefully thread the rear light's rubber holder through the ventilation opening on the back
of the helmet.
• Now carefully push the rear light into the opening.
• Guide the rubber tab under the helmet to the rear and fix it in the provided rear light
holder.
3. FUNCTIONS
The LED rear light has four different functions that can be used as you like.
Press once: Permanent light
Press twice: Flashing light
4. CHANGING THE BATTERY (FIG. I3)
The LED rear light is already equipped with a LR 1130 [1.5
V) battery at the time of purchase.
• To change the battery loosen the 2 screws on the back and disassemble the housing
(Fig. I3a)
• Inside the rear light there are two button cells, push them out of the holder (Fig. I3c).
• The new batteries can now be inserted.Then close the housing again.

CLEANING AND CARE INSTRUCTIONS

The LED rear light's housing can be cleaned with a damp cloth.
WARRANTY
This product has been manufactured to the highest quality standards, tested and
approved according to the relevant standards. In addition to the replacement warranty,
the buyer is entitled to a warranty period of 24 months from the date of purchase on the
material and workmanship with presentation of proof of purchase. The warranty does
not cover damage caused by accident, misuse, alterations to the product, normal wear
and tear and improper handling of the product The original stickers on the inside of the
helmet must not be removed.
10
Press three times: Chase light
Press four times: Light off
Battery type: LR 1130 (1.5 V),
LED class 1