CRATONI Rearlight Modo De Uso página 16

USER INSTRUCTIONS, LED REAR LIGHT [D/J]
1. BEFORE USING IT FOR THE FIRST TIME
Remove the safety strip from the back of the LED rear light before using it for the first time
(Fig. D1/J1).
2. REMOVING AND ATTACHING THE REAR LIGHT
The LED rearlight is attached to the rotating wheel of your bicycle helmet's size adjustment
system.Please make sure that the rear light studs are on the rotating wheel's studs(Fig.D2/J2).
3. FUNCTIONS
The LED rear light has four different functions that can be used as you like (Fig. D3/J3).
Press once: Permanent light
Press twice: Flashing light
4. CHANGING THE BATTERY (FIG. D4/J4)
The LED rear light is already equipped with a CR 2025 (3V) /
CR1225 (3V) battery at the time of purchase.
• To change the battery, use a small screwdriver to open the screws on the back of the light.
• Then lift off the cover, change the battery and replace the cover (Fig. J4).
• Now reattach the cover using the three screws (Fig. D4).
USER INSTRUCTIONS: LED REAR LIGHT [E]
1. BEFORE USING IT FOR THE FIRST TIME
Remove the safety strip from the LED rear light before using it for the first time.
2. REMOVING AND ATTACHING THE REAR LIGHT
Not necessary with this rear light because it is built into the helmet.
3. FUNCTIONS
The LED rear light has three different functions that can be used as you like.
Press once: Permanent light
Press twice: Flashing light
4. CHANGING THE BATTERY
The LED rear light is already equipped with two LR 1130 (1.5V)
batteries at the time of purchase.
8
Press three times: Chase light
Press four times: Light off
Battery type: CR 2025 (3V) /
CR1225 (3), LED class 1
Press three times: Chase light
Press four times: Light off
Battery type: LR 1130 (1,5V),
LED class 1