Idiomas disponibles
Idiomas disponibles
For non-Windows Computers
1.
Make note of the current IP setting on your PC, then set your
PC to the following IP address and subnet mask:
199.173.157.100
IP Address:
Subnet Mask:
2.
Log into the ATA Manager. Open your browser and enter
199.173.157.150
in the address bar. When the login
window opens, type administrator for User Name and
metamorph for Password:
administrator
User Name:
metamorph
Password:
3.
After you log in, click the Advanced button at the top of the
page. Then click System on the left side of the page.
4.
Under System, click DHCP Configuration. Click the
Disable radio button. Click Save Settings.
5.
Under System, click DNS Configuration. Enter the DNS
settings for your Internet Connection. Then click Save
Settings. Note: You may find the DNS settings in your
modem or router settings.
6.
Under System, click Static IP. Click the Static IP Enable
radio button. Enter the desired settings for static IP, subnet
mask, and gateway. Click Save Settings then click Reboot.
7.
Reset your PC to its previous IP address.
8.
Your ATA is now ready to work with your static network.
Please continue with Quick Setup of a Zoom ATA for Use
with a SIP VoIP Service above.
255.255.255.0
7
