Idiomas disponibles
Idiomas disponibles
Configuring the ATA for a Static Network
For Windows Computers –
1.
Use your browser to go to www.zoom.com/atamanager
and then follow the simple instructions to save the ATA
Manager icon to your Desktop. This takes less than a
minute.
2.
Make note of the current IP setting on your PC, then set your
PC to the following IP address and subnet mask:
199.173.157.100
IP Address:
Subnet Mask:
Click Control Panel then Network. Select TCP/IP in the
Network Configuration box. Then click Properties. Click
Specify IP Address. Then enter the IP address and subnet
mask. Click OK, then OK again.
3.
Double-click the ATA Manager icon and log into the ATA
Manager. Type administrator for User Name and
metamorph for Password.
administrator
User Name:
metamorph
Password:
4.
After you log in, click the Advanced button at the top of the
page. Then click System on the left side of the page.
5.
Under System, click DHCP Configuration. Click the
Disable radio button. Click Save Settings.
6.
Under System, click DNS Configuration. Enter the DNS
settings for your Internet Connection. Then click Save
Settings. Note: You may find the DNS settings in your
modem or router settings.
7.
Under System, click Static IP. Click the Static IP Enable
radio button. Enter the desired settings for static IP, subnet
mask, and gateway. Click Save Settings then click Reboot.
8.
Reset your PC to its previous IP address.
9.
Your ATA is now ready to work with your static network.
Please continue with Quick Setup of a Zoom ATA for Use
with a SIP VoIP Service above.
6
255.255.255.0
