ResMed Swift LT Manual Del Usuario página 4

Fitting your Swift LT
B
1
(A) Hold the pillows at
your nose; (B) pull the
headgear over your head.
4
Rotate frame to adjust
pillow angle to ensure it
sits comfortably.
Using the Plastic Tube Retainer (Optional)
1
Push tube retainer into
buckle. Clip either short
tube or air tubing to tube
retainer.
A
2
Adjust top straps (over-
tightening may cause
excess pressure on your
nose).
5
Connect the short tube
to the flow generator's air
tubing.
2
When using the tube
retainer, the tubing can be
positioned to either side of
your face or centered.
3
3
Adjust each end of the
backstrap (overtightening
may cause excess
pressure on upper lip).
6
The Swift LT is now fitted
and ready for use. Head-
gear should sit midway
between ear and eye.
3
If the mask pulls on your
nose, increase length of
tube between mask and
tube retainer.