RODCRAFT MBX - RC7091 Manual De Instrucciones página 16

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
GB
Operating Instructions
MBX System Pneumatic
Brush belts, knee style
Working direction
Brush belts, straight
Rubber Eraser
When using, never allow eraser to stand in one spot during use. This could
result in surface damage due to excessive heat build up.
Re-sharpening of the bristles
After you have used the MBX belt for a certain period, the tips of the bristles
will become round, and this will reduce the brushing effect. Re-sharpening the
bristles will restore the MBX belt to its proper performance.
For knee style belts:
Assemble the MBX belt upside down to provide reverse spinning to the belt.
Spin the belt on the grinding stone for 15 to 30 seconds, applying slight pres-
sure. Then assemble the MBX belt again, in the correct direction.
For straight belts:
Do not attempt to re-sharpen the bristles on the straight belt. These bristles
cannot be re-sharpened.
16
Tabla de contenido
loading

Este manual también es adecuado para:

8951176010

Tabla de contenido