Control Panel - Star TSP700 Serie Manual De Usuario

Connecting the Optional AC Adapter
Note: Before connecting/disconnecting the AC adapter, make sure that power to the printer and
all the devices connected to the printer is turned off. Also make sure the power cable plug
is disconnected from the AC outlet.
(1)Connect the AC adapter to the power cable.
Note: Use only the standard AC adapter and power cable.
(2)Connect AC adapter to the connector on the printer.
(3)Insert the power cable plug into an AC outlet.

Control Panel

3 FEED button
2 ERROR lamp (Red LED)
1 POWER lamp (Green LED)
Important!
When disconnecting the cable, take hold of the cable
connector to pull it out. Releasing the lock makes it easy to
disconnect the connector.
Pulling the cable excessively could cause damage to the
connector.
1 POWER lamp (Green LED)
Lights when the power is ON
2 ERROR lamp (Red LED)
Indicates various errors in combination with POWER
lamp
3 FEED button
Press the FEED button to feed roll paper.
– 6 –