Switch Leds - Allied Telesyn AT-9006SX/SC Guía De Instalación Rápida

Switch LEDs

Table 2 and Table 3 describe the functions of the LEDs on the Ethernet
switch.
LEDs State
Fault Solid Red
Flashing Red
OFF
RPS Solid Green
Power Solid Green
LEDs
Link/Activity
Duplex/Collision
For information on troubleshooting the switch, refer to the AT-9006SX/SC
and AT-9006LX/SC Installation Guide.
Table 2 Power and Fault LEDs
Description
The switch or management software is malfunctioning.
The switch is booting, running diagnostic tests, writing
images to FLASH, or transferring files using XMODEM.
Normal operation.
The RPS is connected to the switch. To verify that the
RPS is operating correctly, refer to your RPS manual.
The switch is receiving power, voltage is within the
acceptable range, and the power supply is working.
Table 3 Port LED Status
State Description
Solid Green This indicates a link.
Flashing Green This indicates activity.
Solid Green The port is operating at full-duplex.
Solid Amber The port is operating at half-duplex.
Flashing Amber Collisions are occuring on the line.
AT-9006 Quick Install Guide
9