Refrigerator Care; Cleaning - Haier HRB15N3 Instrucciones De Instalación

REFRIGERATOR CARE

CLEANING

Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about once a
month to avoid buildup of odors. Wipe up spills immediately.
Because air circulates between both sections, any odors formed
in one section will transfer to the other. You must thoroughly
clean both sections to eliminate odors. To avoid odor transfer
and drying out of food, wrap or cover foods tightly.
IMPORTANT
:
• Do not use harsh chemicals, ammonia, chlorine bleach,
concentrated detergent, solvents, abrasives or metal
scouring pads to clean your refrigerator inside or out. They
can damage and/or discolor the refrigerator finish.
• Do not use warm water to clean glass shelves while they
are still cold. Glass may break when exposed to sudden
temperature changes or impact.
18
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
1. Unplug refrigerator or disconnect power.
2. Clean the interior. Hand wash, rinse, and dry removable
parts and interior surfaces thoroughly. Use a clean sponge
or soft cloth and a mild detergent in warm water.
3. Clean the exterior surfaces.
Painted metal: Wash painted metal exteriors with a clean,
soft cloth or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry immediately
to avoid water spots.
Stainless steel: Stainless steel is corrosion resistant
and not corrosion-proof. To help avoid corrosion of your
stainless steel, wash stainless steel surfaces with a clean,
soft cloth or sponge and a mild detergent in warm water.
Rinse surfaces with clean, warm water and dry immediately
to avoid water spots.
NOTE: When cleaning stainless steel, always wipe in the
direction of the grain to avoid cross-grain scratching.
4. Plug in refrigerator or reconnect power.
READ AND SAVE THESE INSTRUCTIONS
WARNING
Electrical Shock Hazard
49-1000580 Rev. 0