Troubleshooting Procedures (cont.)
Symptoms
13. Remote control does not work.
14. Lights near whirlpool floor do
not work.
Troubleshooting the Chromatherapy Lights
Symptoms
15. Chromatherapy lights do not
work.
Kohler Co.
Probable Causes
B. Dry or dislodged jet O-ring
(squeal).
A. Batteries improperly installed
or dead.
B. Antenna on wiring harness is
damaged.
C. Remote control not
programmed correctly.
D. Remote control does not work.
E. Control does not work.
A. Wiring damage.
Probable Causes
A. Loose, disconnected, or
damaged wiring/connections.
B. Control does not work.
13
Recommended Action
B. Remove jet, replace and
lubricate O-ring, and reinstall
jet.
A. Replace batteries.
B. Replace wiring harness. Refer
to the installer/dealer.
C. See homeowners guide or
service manual.
D. Replace remote control.
E. Replace control. Refer to the
installer/dealer.
A. Check for loose or damaged
wires. Repair or replace as
needed.
Recommended Action
A. Check wiring for proper
connections. Replace wiring if
necessary. Refer to the
installer/dealer.
B. Replace control. Refer to the
installer/dealer.
1042951-5-B