Ec Declaration Of Conformity - Stanley FATMAX FMEH750 Manual De Instrucciones

ENGLISH
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Further information is available at www.2helpU.com
Technical data
Input voltage
V
AC
No-load speed
min
-1
Impact rate
min
-1
Weight
kg
Max. drilling capacity
Concrete
mm
Steel
mm
Wood
mm
Level of sound pressure according to EN 60745:
Sound pressure (L ) 101 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 112 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete (a
Drilling into metal (a ) 3,8 m/s
h, D
6
(Original instructions)
FMEH750 (Type 1)
0 ~ 3200
0 ~ 54400
) 14,6 m/s , uncertainty (K) 1,5 m/s
2 2
h, ID
, uncertainty (K) 1,5 m/s
2 2

EC declaration of conformity

MACHINERY DIRECTIVE
Stanley Europe declares that these products described under
"technical data" are in compliance with:
EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with directive
2014/30/EU, 2006/42/EC and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the techni-
cal file and makes this declaration on behalf of
Stanley Europe, Egide Walschaertsstraat14-18,
Guarantee
Stanley Fat Max is confident of the quality of its products and
offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
230
To claim on the guarantee, the claim must be in accordance
with Stanley Fat Max Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the Stanley Fat Max 1
1.95
year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
16
com, or by contacting your local Stanley Fat Max office at the
13
address indicated in this manual.
32
Please visit our website www.stanley.eu/3 to register
your new Stanley Fat Max product and receive updates on
new products and special offers.
FMEH750 Impact drill
Stanley FatMax.
Director of Engineering
2800 Mechelen, Belgium
R. Laverick
19/02/2018