Messages And Codes - Dell Precision Workstation 530 Guía De Configuración Y Referencia Rápida

30
Setup and Quick Re ference Guide
Changing the Boot Sequence
NOTE: For more information, see your User's Guide.
Turn on your computer (if your computer is already on, restart it).
1
When F2 = Setup appears in the upper-right corner of the screen,
2
press <F2>.
The System Setup menu appears.
NOTE: If you wait too long and your operating system begins to load into
memory, let the computer complete the load operation, then restart the
computer and try again.
Use the arrow keys to highlight the Boot Sequence menu option and
3
press <Enter> to access the pop-up menu.
NOTE: Write down your current boot sequence in case you want to
restore it after running the Dell Diagnostics.
Use the arrow keys to highlight
4
menu option and press <+> to move it to the top of the list.
Press <Alt><b> to restart your computer.
5

Messages and Codes

Your application programs, operating system, and computer can identify
problems and alert you to them. When a problem occurs, a message may
appear on your monitor screen, a beep code may sound, or a light code may
be generated. The following subsections present information about
messages, beep codes, and light codes.
System Lights
Your computer has a number of lights that can help you analyze and solve
problems. To locate these lights, see "Computer Features" on page 10.
The following table lists the codes for the system lights, gives probable
causes, and suggests corrective actions.
NOTE: For many system light codes, it is helpful to check the diagnostic lights
to see if the specific problem is identified. See "Diagnostic Lights" on page 32.
CD Device Boot First Device:
in the