Electrical
Risk of electric shock. Can shock, burn or kill. Disconnect power before working on pump, motor,
pressure switch, or wiring.
Risk of fire. Never connect a 115 volt motor to a 230 volt line.
Voltage Conversion
Your dual-voltage motor's terminal board (under the
motor end cover) will match one of the diagrams below.
Follow that diagram if necesary to convert motor to
115 Volt power.
Connect power supply wires to L1 and L2.
The motor is set for 230 volts when shipped.
To change the motor to use 115 volts:
1. Turn off power
2. Remove the back motor cover.
Figure 2 - Changing the Voltage Setting
3. Use a 1/2" wrench and turn the voltage selector
dial counterclockwise until 115 shows in the dial
opening.
Figure 3 - Motor Set for 115 Volt Operation
4. Reinstall the motor cover.
Risk of electric shock. Can shock, burn
or kill. Disconnect power to motor before working on
pump or motor. Ground motor before connecting to
power supply.
5