Manner Of Operation; Cutting Grass - Grizzly Tools CT 2000 Li Traducción Del Manual De Instrucciones Original

To adjust the height:
The telescopic shaft allows you to adjust
the appliance to your personal size.
Loosen the threaded bush (8). Adjust
‚
the telescopic shaft (9) to the correct
length and tighten the threaded bush.
To adjust the cutting angle:
Changing the cutting angle lets you trim
grass at places that a difficult to reach,
e.g. under benches or wall offsets.
Tread on the pedal (11) on the motor
ƒ
housing and tilt the telescopic shaft
(9). There are 5 preset tilt angles (see
"Work instructions").
Function as a lawn trimmer:
Cutting angle position 1 - 4
(rotary position 0°)
Function as a lawn edge trimmer:
Cutting angle position 5
(rotary position 180°)
To adjust the handle rod:
The handle rod (6) can be turned by 180°
(see "Work instructions").
Press the latch (7) to release the
„
lock and rotate the handle section
0° 180°
(6) until it latches into the
desired position.
Leave the handle (6) in the
0°-position when using the de-
vice as a lawn trimmer in the
cutting angle positions 1 - 4.
The protective cover must not
be pointing away from the user.
Risk of injury.
To adjust the spacer bow
(flower guard): The spacer bow keeps
the trimming assembly away from plants
and trunks not to be cut.
Fold down the distance bracket (15).
…
If the distance bracket is not required,
fold it up into the park position.

Manner of operation

WARNING. Danger of injury!
• Do not cut moist or wet grass.
• Before starting the unit, make
sure that the spool is not touch-
ing any stones, scree, or other
foreign objects.
• Switch on the trimmer before
you approach the grass that is
to be cut.
• Do not overload the trimmer
during operation.
• Avoid contact with obstacles
(stones, walls, fences, etc.). The
cutting inserts would wear out
rapidly.
• Avoid using the device in bad
weather, especially if there is a
danger of lightning!

Cutting grass

Cut tall grass by a series of levels from
top to bottom.
GB
Cut the grass by
swaying the trim-
mer sideways to
the right and left.
Cut slowly while
the trimmer is tilted
forwards by ap-
prox. 30°.
63