Uline IH-6993 Manual De Instrucciones página 3

9. Fasten tabletop to mounting plates with four wood
screws using a Phillips screwdriver, drill or 10 mm
wrench.
NOTE: For additional security, attach four remaining wood screws to side panel mounting plate.
(See Figure 5)
10. Using a 10 mm wrench, attach front panel shelf
mount to front panel on each end by inserting one
M6 x 30 mm hex bolt and one small flat washer into
threaded nut. (See Figure 5)
NOTE: Place at same height as back panel
shelf mount.
Figure 5
Shelf
Mount
PAGE 3 OF 9
ASSEMBLY CONTINUED
11. Insert two bottom shelf panels. They should sit on the
12. Insert the center shelf panels with the cut sections
Side Panel
Mounting Plate
13. Disassemble door handle. Reassemble door handle
1-800-295-5510
uline.com
lower shelf lip. (See Figure 6)
facing the back left and back right corners of the
cabinet. (See Figure 6)
Figure 6
Bottom
Shelf Panels
with lock bar. (See Figure 7)
Figure 7
Center
Shelf Panels
0821 IH-6993