Specific Information; Authorized Persons; Disclaimer - Renfert SILENT TS2 Manual Del Usuario

2.5.2 Specific Information

► The mains socket on the device is only designed for purposes specified in the operating in-
structions. Connecting other devices may cause material damage.
► Before connecting another electrical appliance to the mains socket, switch the unit off.
► Read the operating instructions of the other appliance and comply with the safety instructions
contained in the document.
► Please observe the national regulations and permitted exposure to dust in a working environ-
ment. Please ask the "National Institute for Occupational Safety and Health" or other responsi-
ble authority.
► Please observe the Safety Data Sheets of the materials to be extracted.
► Always wear protective gear, when extracting hazardous materials.
► It is necessary to wear suitable personal protective equipment when emptying the dust drawer
EN
or cleaning, depending on the type of extracted material.
► When disposing of the extracted material or used filter, please observe the local specifications
and accident prevention regulations!
► Make sure the dust drawer is fully closed during operation.
► Do not operate without a suction hose.
► Do not extract flammable or explosive gasses, fumes or dust.
► The following applications involve increased risks and are therefore not permitted:
When cleaning milling chambers and SLM printing systems by suction, a sufficiently high con-
centration and purity (i.e. unmixed with other dental dusts such as gypsum, resins) can result
in spontaneous ignition or the milling dust exploding or printing powder because of a potential
exothermic reaction (e.g. due to oxidation).
An alternative cleaning method must be selected for the following milling or printing media in
particular (such as manual cleaning):
• Wood
• Titanium / titanium-aluminum
• Light metals and light metal alloys (e.g. aluminum, magnesium)
• Cobalt chrome powder (e.g. for use in SLM systems)
If large quantities of light metals such as titanium alloy are processed (e.g. with sandpaper),
producing very fine grinding dust, a sufficiently high concentration and purity may result in
spontaneous combustion because of a potential exothermic reaction.
► Do not extract hot materials.
► Do not extract liquids.
► If the dust extractor is employed to extract hazardous materials, appropriate personal protec-
tive gear must be worn and steps must be taken to ensure that the exhaust air is properly venti-
lated. Please refer to the associated safety data sheets for specific requirements.
► Dispose of extracted material according to local statutory regulations.
2.6

Authorized Persons

Operation and maintenance of the device may only be performed by qualified personnel.
Minors and pregnant women may only operate and service the device if they are wearing appropriate
protective gear, in particular if the device is being used to extract hazardous materials.
Any repairs not specifically described in these operating instructions may only be carried out by a qual-
ified electrician.
2.7

Disclaimer

Renfert GmbH shall be absolved from all claims for damages or warranty if:
► The product is employed for any purposes other than those specified in the operating instruc-
tions.
► The product is altered in any way other than those alterations described in the operating in-
structions.
► The product is not repaired by an authorized facility or if non-original Renfert parts are imple-
mented.
► The product continues to be used despite obvious safety faults or damage.
► The product is subjected to mechanical impacts or is dropped.
- 4 -