Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting a VCR
Video Connection
TV Rear Panel
Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape.
Each VCR has a different back panel configuration.
➣
When connecting a VCR, match the color of the connection terminal to the cable.
➣
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
➣
(Yellow).
VCR Rear Panel
3
RF Cable (Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
English-
Unplug the cable or antenna
from the back of the TV.
Connect the cable or antenna
2
to the ANT IN terminal on the
back of the VCR.
Connect an RF Cable between
3
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable between
the VIDEO OUT jack on the
VCR and the AV IN 1 [Y/VIDEO]
jack on the TV.
Connect Audio Cables between
the AUDIO OUT jacks on
the VCR and the AV IN 1 [R-
AUDIO-L] jacks on the TV.
If you have a "mono" (non-stereo)
➣
VCR, use a Y-connector (not
supplied) to hook up to the right
and left audio input jacks of the
TV. If your VCR is stereo, you
must connect two cables.
Tabla de contenido
