Recharging - Samsung SR8730 Manual Del Usuario

Recharging

You can have the Vacuum cleaning Robot return to the charger
to charge the battery by using the Recharging button.
■
When the Vacuum cleaning Robot is operating, press the (
button to cancel the operation and press the Recharging button.
1. Press the Recharging button.
- The main unit icon (
will return to the charger.
2. To stop the Vacuum cleaning Robot while it is returning to the
charger, press the (
3. To test the auto charge function, press the Recharging button when
the Vacuum cleaning Robot is less than 1.5 m from the charger.
Troubleshooting when the Vacuum cleaning Robot does not
return to the charger
■
Check the installation of the charger
- When the charger is in a location where the charger cannot guide
the Vacuum cleaning Robot to the charger.
- When the charger is more than 5m away from Vacuum cleaning
Robot.
: It may require a longer time for the Vacuum cleaning Robot to
return to the charger.
■
Manually charge the Vacuum cleaning Robot in the following
cases.
- When the charger is installed in a corner.
- When the battery is fully discharged.
- When the Vacuum cleaning Robot is trapped by an obstacle
(furniture etc.)
- When the Vacuum cleaning Robot cannot pass over the doorsill
to the location where the charger is installed.
) is turned on and the Vacuum cleaning Robot
) button.
)
❈
Option
Using the remote Using the remote
control control
Flash Flash
Using the main unit Using the main unit
buttons buttons
operating the cleaner _25