Measuring Frequency; Adt Measurement (Adapt) - Promax MD-200B Manual De Instrucciones

Measuring frequency

3.11
1. Plug the black lead into the "COM" jack and the red lead into the VΩHz
2. Turn the function switch to "Hz ADP" and use the function button to select
frequency measurement.
3. Apply the probes to the signal source.
NOTE: The two lowest digits on the display may not be stable at frequencies of less
than 1kHz or more than 20kHz.

ADT measurement (ADAPT)

3.12
1. Plug the black lead into the "COM" jack and the red lead into the " VΩHz
2. Turn the function switch to "Hz ADP" and use the function button to select ADP
measurement.
3. Apply the probes to the signal source.
Page 18
All manuals and user guides at all-guides.com
USER'S MANUAL. MD-200B
jack.
" jack.
03/2006