4. Power up the connected computers one by one. After your
computers are powered up, the keyboard and mouse will be
recognized and now you can begin operating the KVM switch.
There are two methods to control the KVM Switch for PC switching:
using the Face-Panel Push Buttons or Hotkey Commands. For
audio/MIC switching, use the hotkey command.
Face-Panel Buttons
The Face-Panel Buttons allow a direct control over PC port
switching; simply press the button to switch PC port. By default, PC
port switching and Audio/MIC switching are bound together (both will
be switched simultaneously).
If you want to disable the binding of PC and audio/MIC port
switching, use the hotkey sequence, Scroll Lock + Scroll Lock + W.
To enable the binding again, just hit Scroll Lock + Scroll Lock + Q.
Keyboard hotkey
A keyboard hotkey sequence consists of at least three specific
keystrokes:
*
*
Hotkey Commands = [Scroll Lock]
+ [Scroll Lock]
+
Command key(s)
