Symbols On The Product; Product Information; Safety Instructions - Hilti HAT 28 Manual De Instrucciones

Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
1.3 Product-dependent symbols
1.3.1

Symbols on the product

The following symbols can be used on the product:
Wear a hard hat
Wear eye protection
Wear protective gloves
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Pull-out tester
Generation
Serial no.
2 Safety
2.1

Safety instructions

Basic information concerning safety
WARNING! Read all safety precautions and other instructions.
instructions and other instructions can result in damage to the tool and/or serious injury.
Keep all safety precautions and instructions for future reference.
Proper preparation of the working area
▶ Keep your workplace clean and well lit. Cluttered or poorly lit workplaces invite accidents.
▶ Wear personal protective equipment and always wear protective goggles.
8 English
HAT 28
01
Failure to observe the safety
286175
*286175*