Important Safety Instructions; Before Use - Makita DX05 Manual De Instrucciones

ENGLISH
(Original instructions)
1 Switch trigger
2 Attachment (Dust collection
system)
3 Release button
4 Stroke adjusting button
5 Depth gauge button
Specifications
Suction performance
Rated voltage
Operating stroke
Suitable hammer drill bit
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
• Take particular care and attention.
• Read instruction manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all instructions before operating the attachment. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1. Use the attachment in accordance with these instructions. Use of the attachment for operations different from
those intended could result in a hazardous situation.
2. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
3. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
4. Always wear eye and respiratory protections.

BEFORE USE

Installing or removing the dust collection system
WARNING:
• Always be sure that the tool is switched off and battery cartridge is removed before carrying out any work on
the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from accidental
start-up.
• Before installing the dust collection system, make sure that the attachment points and the power tool itself, particularly
the electrical interface on the power tool, are free from dust and foreign matter. After installing the dust collection
system, also make sure that it is securely installed.
NOTE:
• This dust collection system is intended for use when drilling in only concrete. Never use this system when drilling in
metal or wood.
• This dust collection system collect a significant percentage of the dust produced at work but not all of it.
• Empty the dust case regularly. Failure to empty the dust case regularly may cause dust to release.
• Do not use the dust collection system in core drilling or chiseling applications.
4
Explanation of general view
6 Depth gauge button carriage
7 Distance (X) equal to the drilling
depth
8 Dust case release button
9 Dust case
10 Filter cover
Model
Net weight
11 Slit
12 Filter
13 Sealing cap
14 Nozzle
15 Dial
DX06
350 l/min
1.5 kg (3.2 lbs)
18 V
96 mm MAX
24 mm MAX
DX07
1.5 kg (3.3 lbs)