Factory Reset; Choice Of Management Method - Navkom R7 Serie Instrucciones De Uso

EN
REMOTE CONTROL
DOOR LEAF CONTROL UNIT
BUTTON R ON THE CONTROL UNIT SHOULD BE PRESSED AND HELD
FOR 10 SECONDS. AFTER THIS PERIOD VIOLET LED WILL FLASH 5 TIMES
AND 5 BEEPS WILL BE HEARD.
All fingerprints will be deleted from the database and the device will have the
factory settings restored. All paired remote controls will be unpaired.
BUTTON R ON THE CONTROL UNIT SHOULD BE PRESSED AND
HELD FOR 10 SECONDS. AFTER THIS PERIOD VIOLET LED WILL
FLASH 5 TIMES AND 5 BEEPS WILL BE HEARD.
All fingerprints will be deleted from the database and the device will have
the factory settings restored. All paired remote controls will be unpaired.
BBX MINI CONTROL UNIT
PRESS AND HOLD THE BUTTON
All fingerprints stored in the memory, including administrator fingers, will
be erased and the device will be reset to factory settings. Connection with
the mobile phones/devices will be lost.
After this operation, mobile phone must be paired first.
After performing the reset function, all Wi-Fi connections that
are stored in the mobile phone settings must be deleted.
90
BUTTONS A and
Enrollment and deletion of user fingerprints.
BUTTONS C and
Unlocking the door and triggering relay 2.

FACTORY RESET

DIN CONTROL UNIT
R FOR 10 SECONDS
When using the reader for the first time, you can choose between three different modes of operation: analog,
with the application, or hybrid. The mode of operation is chosen simply by using the reader in the desired way.
B
ANALOG CONTROL
D
Perform a factory reset and then start adding administrator fingerprints by pressing button 1 on the
control unit or button A on the remote control.
CONTROL WITH APPLICATION
Perform a factory reset and add the reader to the X-manager application. Connect it to the
application and then start entering administrator fingerprints into the application.
HYBRID CONTROL
Perform a factory reset and add the reader to the X-manager application. Connect it to the
application and then start adding administrator fingerprints by pressing button 1 on the control
unit or button A on the remote control.
THE MODE OF OPERATION MAY BE CHANGED AT ANY TIME BY RETURNING THE DEVICE TO THE
FACTORY SETTINGS AND THEN STARTING TO USE IT IN THE DESIRED WAY.
If the device is reset to the factory settings, the fingerprint database and all other settings will be deleted.

CHOICE OF MANAGEMENT METHOD

with the buttons on the control unit or remote control
on a smartphone
using the application only to unlock doors and control LED lighting
EN
91