STEINEL XLED PRO ONE S Manual De Instrucciones página 70

Ocultar thumbs Ver también para XLED PRO ONE S:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 194
The RC 12 remote control can be used for selecting and
setting the following XLED PRO ONE S/Plus S/Max S
functions:
1
Twilight setting: The chosen response threshold can
be set from approx. 2 to 2,000 lux.
➔ Twilight setting (I)
2
Daylight mode (depending on ambient light level)
3
Night mode (2 lux)
4
Light-level setting via the memory button / teach
mode (2-2,000 lux). At the levels of light at which you
want the sensor to respond to movement from now
on: press button. The current value is stored.
5
Time setting: The period of time you want the light
to stay ON for after the last detected movement can
be set to 10 s, 1 min, 5 min, 15 min by pressing
these buttons.
➔ Time setting (H)
6
Chosen ON time: Sets the light to stay ON for a
time of your own choice. Each press of the button
increments the current time setting by 1 min (up to
15 min).
7
Manual override:
Pressing this button in sensor mode switches the
LED floodlight ON for 4 h (status LED lights up
permanently). Pressing this button in 4 h-ON mode
switches the floodlight OFF for 4 h (status LED lights
up permanently). The 4 h mode is terminated after
the time elapses, by pressing the reset button or, in
the 4 h OFF mode ,by pressing the 4 h button.
➔ Manual override
– 30 –
Index
Tabla de contenido
loading

Tabla de contenido