STEINEL XLED PRO ONE S Manual De Instrucciones página 65

Factory settings
– Time setting: 8 seconds
– Twilight setting: Daylight mode 1,000 lux
– Basic light level: OFF
Time setting (H)
The stay-ON time) can be set to any period from approx.
8 seconds to a maximum of 35 minutes. Every movement
detected re-activates the light.
Note: After the LED floodlight switches OFF, it takes
approx. 1 second before it is able to start detecting move-
ment again. The LED floodlight can then switch ON again
in response to movement.
The shortest time setting is recommended when adjusting
the detection zone and performing the functional test.
Twilight setting (I)
The response threshold (twilight) can be infinitely varied
from approx. 2 to 2,000 lux.
– = daylight mode (depending on ambient light level)
– = night-time operation (approx. 2 lux)
The control dial must be turned to
the detection zone and performing the functional test in
daylight.
when adjusting
– 25 –
Index