How It Works - Delta 72045T Serie Guía Del Comienzo Rápido

How It Works

Changing the Amount of Soap
The dispenser is designed so that when you
grab the spout it should not activate. A tap
will give you a factory set amount of soap. To
modify the amount of soap delivered, follow the
sequence of steps below. The factory setting is
equivalent to 3 taps. So to reduce the amount
delivered, tap 1 or 2 times once in program
mode. To increase the amount delivered, tap 4
or 5 times once in program mode.
Grab the spout for 5 seconds.
You will see a solid purple light.
Let go of the spout.
Tap 1-5 times for the amount of soap you
The blue light flashes the number of
times you selected (ie: 1-5 times).
It will return to a solid purple light.
If a different amount is
desired, re-tap within 5
seconds.
Your soap dispenser will dispense
the same amount with
Touch & Hands-free activation.
want.
The purple light will
turn off 5 seconds
after
last flash.
Your settings have
been saved.
Disabling Hands-free
The hands-free feature of the sensor will allow
your set amount of liquid to be dispensed with-
out touching the spout if you place your hand
or a wet sponge within 1/2 inch anywhere near
the spout. To disable the hands-free mode,
follow the directions below.
Grab the spout for 10 seconds.
The purple light comes on after
5 seconds, but will turn off after
10 Seconds. Let go of the spout when the
You will see a solid red light for
3 Seconds. Hands-free is now off.
To turn hands-free back on, grab the spout for
The Purple Light comes on after
5 Seconds, but will turn off after
10 Seconds. Let go of the spout when the light
You will see a solid blue light for
3 Seconds. Hands-free is now on.
5
light turns off.
10 seconds.
turns off.