STAYER WELDING MIG Serie Manual De Instrucciones página 24

Contents
1. INTRODUCTION ...................................................... 25
2. SAFETY INSTRUCTIONS ....................................... 25
3.
INSTRUCTIONS FOR PUTTING INTO OPERATION
3.1. Positioning ....................................................................... 28
3.2. Assembling ...................................................................... 28
3.2.1. Models with internal winder ................................................. 28
3.2.2. Models with external winder ..................................... 28
3.3. Mains connection............................................................. 28
3.4. Illustrated description of functions ................................... 29
3.5. Limitations to environmental conditions........................... 29
4. OPERATING INSTRUCTIONS ................................ 29
4.1 Positioning and testing ..................................................... 29
4.1.1 Shielded Metal Arc Welding (MMA) ........................... 29
4.1.2 TIG Welding ............................................................... 29
4.1.3 MIG/MAG Welding ..................................................... 29
4.2 Tool replacement .............................................................. 29
4.2.1 MMA process (shielded electrode) ............................ 29
4.2.2 TIG process ............................................................... 29
4.2.3 MIG/MAG process ..................................................... 30
4.3 Setting operations............................................................. 30
4.3.1 MMA process (shielded electrode) ............................ 30
4.3.2 TIG process ............................................................... 30
4.3.3 MIG/MAG process ..................................................... 30
4.4 Limits to workpiece size.................................................... 31
4.5 General instructions for use.............................................. 31
4.5.1 Specific instructions MMA welding (shielded electrode) ......31
4.5.2 Specific instructions TIG wire welding ....................... 31
4.5.3 Specific instructions MIG/MAG wire welding ............. 32
5.
SERVICING AND MAINTENANCE INSTRUCTIONS
6. REGULATORY MARKING ....................................... 33
6.1 Explanation of regulatory markings .................................. 33
6.2 Technical features ............................................................. 33
6.3 Declaration of Conformity ................................................. 33
1. INTRODUCTION
This produce is a MIG/MAG equipment for continuous wire metal,
shielded electrode and TIG process welding. Technologically,
the STAYER WELDING equipment is a power supply source
for high-frequency power transfer managed y intelligent control
logics.
In contrast to traditional technology which is based on
transformers operating at 50 Hz public grid frequency, STAYER
WELDING has a larger power density per weight unit, is more
economizing and has the possibility of accurate, instantaneous
and automatic control of all welding parameters.
As a result, you will more easily produce improved welding with
equipments that consume less and have a lower mass than
equivalent traditional equipments based on heavy transformers.
2. SAFETY INSTRUCTIONS
READ THE INSTRUCTIONS.
• Read the User Manual completely and understand it before
using or giving service to the unit.
• Only use genuine manufacturer's parts.
ENGLISH
24
Symbols used
Indicates a dangerous situation which, when not avoided,
will lead to death or serious injury. Possible hazards are
shown in the attached symbols or explained in the text.
Indicates a dangerous situation which, when not avoided,
.. 28
will lead to serious injury.
Possible hazards are explained in the text.
Arc-welding hazards
Only qualified persons may install, operate, maintain and
repair this machine.
During its operation, keep anyone away, especially
children.
An electric shock may kill you.
Touching live current carrying parts may cause fatal electric
shock or serious burns. The working and electrode circuit is
always electrically live when the machine output is on. The input
circuit and the inner circuits of the machine are also electrically
live when the machine is on. When welding with automatic or
semiautomatic equipment, the wire, the reel, the frame containing
the supply rolls and all metal parts touching the welding wire are
electrically live. Incorrectly-installed or not-earthed equipment is
a very serious danger.
• Do not touch electrically live parts.
• Use dry isolating gloves without openings, and protection on
your body.
.. 32
• Isolate yourself from the work and from the ground by using
carpets or covers that are sufficiently large to prevent any
physical contact with the work or ground.
• Do not use the AC output in humid areas, if its movement is
restricted or when in risk of falling gown.
• Use an AC output ONLY when required by the welding process.
• When an AC output is required, use a remote control if there is
one present in the unit.
• Additional safety precautions are required when any of the
following dangerous electric conditions is present in humid
rooms or while you are wearing humid clothing, when working
on metal structures such as floors, grates or scaffolds; when you
are in a tight position such as seated, kneeling, laying down or
when there is a high risk of having unavoidable or accidental
contact with the workpiece or ground.
• Disconnect power input and stop the motor before installing or
servicing this equipment.
• Install equipment and connect it to ground in accordance with
the operator's manual and national, state and local codes.
• Always check the supply to ground - check and make sure that
the power input to the ground wire is appropriately to the grounding
terminal at the disconnection box or that its plug is appropriately
connected to the output receptacle that is connected to ground.
When making these input connections, first connect the ground
conductor and double-check the connections thereof.
24