Safety Instructions - PAW DN 20 Instrucciones De Montaje

1. Safety instructions

The installation and commissioning as well as the connection of electrical components require
technical knowledge commensurate with a recognised vocational qualification as a fitter for
plumbing, heating and air conditioning technology, or a profession requiring a comparable level
of knowledge [specialist]. The following must be observed during installation and
commissioning:
relevant local and national regulations
•
accident prevention regulations of the professional association
•
instructions and safety instructions of this manual
•
NOTICE
Material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant
properties get lost. We do not assume liability nor provide warranty for damage to property
resulting from sealants damaged in this way.
 It is imperative to avoid that EPDM gets in contact with substances containing mineral
oils.
 Use a lubricant based on silicone or polyalkylene and free of mineral oils, such as
Unisilikon L250L and Syntheso Glep 1 of the Klüber company or a silicone spray.
2. Change of the flow line [specialist]
Mixing valve with flow on the right
4
Flow
9934012-mub-ml – V01
Flow
Mixing valve with flow on the left
1 Safety instructions
2019/04