Mounting The Camera; Connecting The Camera - Honeywell L Serie Manual De Instrucciones

Mounting the Camera

Mounting points are provided on the top of the camera for
mounting the camera on a bracket or tripod. They are
designed to accept standard sized 1/4 x 20 mounting
screws. This bracket can be unscrewed and mounted onto
the opposite side of the camera, depending on your
application. The mounting bracket must be capable of
supporting the weight of the camera and its lens.
Note Some installation codes dictate that the
mounting bracket must be capable of
supporting up to four times the combined
weight of the camera and lens.
Figure 5
Unscrew 3 bracket
securing screws and
then resecure the
bracket on the other
side of the camera.

Connecting the Camera

Note Check the power source from the external
power supply before applying power to the
camera.
1. Connect the VIDEO connector on the rear of the
camera to the video-in connector on your monitor.
2. Connect the camera to a power supply appropriate for
your installation.
HCD484L, HCD484LX:12 VDC or 24 VAC power
supply
HCD485LX: 230V power supply
Rev 2
Camera Mount
6 G-113079-002
02/07