PAIRING AND UNPAIRING A TELEPHONE
ON
OFF
Bluetooth® connection
To activate the audio system's
Bluetooth® function:
– press 10;
–
select "Bluetooth ON/OFF" using
the buttons 4 or the control knob 16
on the steering column control, then
press 5 or 17 to confirm;
– select "ON" using the buttons 4 or
the control knob 16 on the steering
column control, then press 5 or 17 to
confirm.
GB.20
(1/3)
Pairing a phone
To use your hands-free system, pair
your Bluetooth® mobile phone with
the vehicle. Check that the Bluetooth®
of your phone is activated and set its
status to "visible".
Pairing will enable the hands-free
phone system to recognise and store a
phone. You can pair up to five phones,
but only one can be connected at a
time.
Pairing can be performed either via the
audio system or via your phone.
Your audio system and phone must
both be switched on.
Note: if you pair a new telephone when
another telephone is already connected
to the audio system, this latter will be
disconnected and replaced by the new
paired telephone.
Two ways of pairing are possible:
– "Make the radio visible";
– "Pair a phone".