Kenwood AT640 Manual De Instrucciones página 6

Use the K beater in the mixing bowl
G
to mix cakes - you'll get better results.
maximum capacities
pastry (flour weight) 300g (10oz)
G
meat 340g (12oz)
G
to use the
slicer/shredder/chipper
To buy a cutting plate not included in
your pack, call Kenwood Spares
Department 0870 2413653.
what the cutting plates do
slicer/shredders
Plates and
side slices, the other side shreds.
You can slice cheese, carrot, potato,
cabbage, cucumber, courgette,
beetroot, onion. You can shred
cheese, carrot, potato and foods of
a similar texture. Your chosen
cutting side must be
uppermost.
thin (julienne style) chipper
This plate cuts potatoes for Julienne
style French fries and firm
ingredients for salads, garnishes,
casseroles and stir fries (eg carrot,
swede, courgette and cucumber).
extra coarse shredder
coarsely shreds cheese and carrot.
rasping plate
cheese and potato for German
potato dumplings.
are reversible: one
grates parmesan
standard chipper
potatoes for thin French fries and
firm ingredients for salads and dips
(eg swede, cucumber).
1 Lift off the medium speed outlet
cover .
2 Place the connector onto the outlet
with the triangle
you and turn clockwise until it locks
into position.
3 Place the bowl onto the connector
ensuring that the grooves in the bowl
fit over the corresponding lugs on
the connector.
4 Place the cutting plate onto the
connector drive. Your chosen cutting
side must be uppermost. Handle
the cutting plates with care -
they are extremely sharp.
Hold the plates by the centre
grip.
5 Fit the lid onto the bowl, feed tube
towards the back then press down
and turn clockwise until the
indicating arrows line up
If you experience difficulty in
G
fitting the lid, remove the
attachment and switch on the
mixer briefly. Refit the
attachment.
6 Choose which feed tube you want to
use. The pusher contains a smaller
feed tube for processing individual
items or thin ingredients.
to use the small feed tube
First put the large pusher inside the
G
feed tube.
to use the large feed tube
Use both pushers together.
G
7 Put the food into the feed tube.
4
cuts
M M facing towards
.