Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PREPARATIONS
1. Checking the Contents
Check that the carton contains the following items:
(1) Main Unit
(2) Controller Unit
(3) Operating Instructions (This Booklet)
(4) ONE (1) 8P cable right angle
(5) Two (2)2P RCA path cord (L/R)
(6) Two (2) Auto-start cable
(7) ONE (1) AC power cord
2. Installing the Units
(1)
Place your unit on a flat surface or mount it in a secure rack mount case.
(2) Be sure the player is mounted in a well-ventilated area where it will not be exposed to direct sunlight, high
temperatures, or high humidity.
(3) Try to place the unit as far as possible from TVs and tuners, as the unit may cause undesirable
interference.
CAUTION:
The player will work normally when the main unit is
mounted with the front panel at within 15 degrees
of the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
3. Connections
(1)
Turn off the POWER switch
(2)
Connect the RCA cord to the input on your mixer..
(3)
Connect the control cords to the REMOTE connector on the main unit.
CAUTION:
Be sure to use the supplied control cords. Using another type of cable may result in damage.
Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.
15
0
Main unit
The control panel's LCD's are designed to be clearly
visible within the angles. Mount the control unit so
that the visual angle is within this range.
5
0
8
Sight point
45
0
Tabla de contenido
