Yakima 8004036 Manual Del Usuario página 3

position the staCkers
on the Crossbars
Distance from
the stacker to
the tower should
equal the width
of your kayak (or
kayaks) on edge.
Follow these three rules when strapping kayak(s):
Distance of Stacker
from crossbar tower
is exactly the width of
kayak(s) on edge.
load the boat— tie it down with straps
LOOP STRAP
AROUND
STACKER POST.
Cross lines and
set aside.
ConneCt
and
tighten
• Insert end of strap
into buckle as
shown.
• Slide rubber cover
back into place.
1033425B-3/15
Additional straps may be required for more than 2 kayaks.
LOAD BOAT.
• Bring straps up and over boat.
• Hang to the side.
COMPLETELY TIGHTEN THE STACKERS NOW.
• Tighten hex keys on SnapArounds.
• Tighten MightyMount bolts with wrench.
Loop strap
under crossbar
at least once.
• Hook the strap at the
top of the stacker.
• Slide buckle up so
that it hangs at top
edge of boat.
TIGHTEN STRAPS:
• To tighten straps,
hold and pull.
• Secure extra strap.
Loop strap
inboard of
crossbar tower.
ADDED SECURITY:
• Pass strap inboard under
crossbar.
• Pass strap under boat
around base of stacker.
• Pass under crossbar again
and attach to buckle.