Blaupunkt VIO-DP20 Guía Rápida página 7

Step 7
Write the desired camera name (E.g. "Cam front door") in the empty
"Name:" field.
Then press the QR code icon
smartphone over the "QR Code" sticker on the camera. After the "QR
Code" was scanned successfully press "next".
IMPORTANT: If it's a new installation don't change the username or
password here. A mandatory password change will be required in
Step 9.
Step 8
Note: Only for Wi-Fi configuration. For Ethernet configuration
skip to Step 9
Type the password of your Wi-Fi network and press "next".
Note: If you are using dual-band router, please do not connect
the camera to Wi-Fi of 5G frequency range
Step 9
Connection succeeds. Press on "Start Live Preview"
Step 10
For security reasons now type in a new individual camera password.
(Password must contain at least 8 characters, including
at least 2 of the following: Capital letters, small letters, number
and special characters. Please do not use any of the following
characters: & ' , " .
Step 11
Confirm your password and press "save".
and focus with the camera of your
5