Service And Maintenance - Ferm EFM1001 Traducción Del Manual Original

4. service and maintenance

Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate over
a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Malfunction
Should the machine fail to function correctly, a
number of possible causes and the appropriate
solutions are given below:
1. The electromotor gets hot
• The cool ventilation slots in the motor are
stopped up with dirt.
• Clean the cool ventilation slots.
• The motor is defect.
• Please contact the service address on the
warranty card.
2. The connected machine does not work
• Interruption in the mains connection.
• Check mains connection for fracture.
• Please contact the service address on the
warranty card.
3. The dust is not absorbed
• This can be caused by a stopped up dust
extraction
• Clean your dust collection opening
Repairs and servicing should only be
carried out by a qualified technician or
service firm.
cleaning
Regularly clean the device's casing with a soft
cloth, preferably after each use. Keep the fan slits
free of dust and dirt. Remove stubborn dirt using a
soft cloth, dampened with soapy water. Do not use
solvents such as benzene, alcohol, ammonia, etc,
which might damage the plastic parts.
lubrication
The device does not need any additional
lubrication.
defects
Ferm
If a defect appears due to a part wearing out,
please contact the service center on the warranty
card. At the end of these instructions there is an
exhaustive overview of the parts that can be
ordered.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Damaged and/or disposed of electrical
or electronic devices must be dropped
off at recycling stations intended for that
purpose.
Warranty
Read the warranty conditions on the separately
supplied warranty card.
Only for Ec countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EU
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
EN
7