Firmware Upgrade; E-Map - IVS 347Z Manual Del Usuario

Download / Cancel

Firmware Upgrade

This function is used to grade your DVR for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your installer
or distributor.
Step1: Click " ", and select the IP address of your network camera in the address book.
Step2: Click "
Step3: Click "Add" to browse to the upgrade files.
Step4: Click "Upgrade Firmware" to start firmware upgrade.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during firmware
upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.
Step5: Select the IP address of the camera and click "

6.1.4. E-Map

Video Viewer is also a Central Management System (CMS) software, which allows network device control &
management for up to 16 devices simultaneously.
Note: Before using this function, make sure Video Viewer is connected to all the devices (up to 16) you
want to monitor.
Function
" to show the upgrade page, "Update Server".
Description
To simply backup images without previewing, deselect the checkbox
"Simultaneous Playback". You will only see a message box indicating
the total time needed, the current status and the saving location.
Click "Download" to start or "Cancel" to discard the video backup.
" again to check if the firmware is upgraded.
39
REMOTE OPERATION