IVS 347Z Manual Del Usuario página 33

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 294
result will display in "CONNECTION".
2)
MENU
Click "SETUP" to configure the connected zoom lens control camera.
Different zoom lens control cameras might have different parameter settings. For details, please refer to their
own user manuals.
Note: While configuring the camera parameters, the DVR will switch to the corresponding channel, and
you can simultaneously preview the effects for the settings.
3)
DEVICE
Here shows the model number of the camera.
4)
CONNECTION
Here shows the examining result for DCCS signal transmission between the DVR and camera. The
message is as follows:
MESSAGE SHOWN
CHECKING
OK
FAIL
5.5.10 IVS
Note: Before using the IVS function, make sure the event record function is enabled on your DVR.
IVS, Intelligent Video Surveillance, is the advanced application for motion detection, but more precise and smarter.
It can be applied to different situations with one of the following three modes: FLOW COUNTING, VIRTUAL
FENCE, and ONE WAY.
When anyone crosses the detection line (virtual fence), the recording will be on.
Note: Four camera channels are supported for this function. For 16CH and 8CH models, users are
allowed to select four camera channels randomly to use this function; for 4CH models, all the four
camera channels are supported.
CANERA
IVS1 IVS2 IVS3 IVS4
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
1)
CAMERA
(For 16CH & 8CH models only)
Select the camera channel that you want to use the IVS function.
2)
IVS MODE
Select one of the following three modes depending on your environment:
MODE
FLOW COUNTING
VIRTUAL FENCE
MEANING
The DVR is checking the DCCS signal transmission between the DVR and camera.
The signal transmission is fine and the DCCS function works properly.
The signal transmission is too weak or not available for the DCCS function to work properly.
ADVANCE CONFIG
CAMERA
(For 16CH & 8CH models only)
IVS MODE
DISPLAY LINE
SENSITIVITY
RESET COUNT
VIRTUAL FENCE AREA
SCENE CHANGE
SCENE CHANGE SENSITIVITY
DESCRIPTION
A virtual detection line is set to detect the moving direction of pedestrians for flow counting.
A virtual detection line is set to detect intruders crossing the detection line, and an alarm will be
triggered.
CH3
FLOW COUNTING
OFF
07
SUBMIT
SETUP
OFF
MIDDLE
28
MAIN MENU
Tabla de contenido
loading

Tabla de contenido