Canon imagePRESS C1+ Guia página 67

Elemento
Layout
Binding Location
Margin
Offset Short Edge (Front)
Offset Long Edge (Front)
Offset Short Edge (Back)
Offset Long Edge (Back)
Auto Continue
Job Securing Time
Timeout
Print After Completing RIP
Finishing
Punch
Booklet
Saddle Stitch *3
Creep Correction *3
Transparency Interleaving
Copy Set Numbering *4
Copy Set Numbering
Print Position
Starting Number
Opciones
Long Edge * , Short Edge
-50.0 a +50.0 mm; 0.0 * mm
-50.0 a +50.0 mm; 0.0 * mm
-50.0 a +50.0 mm; 0.0 * mm
-50.0 a +50.0 mm; 0.0 * mm
-50.0 a +50.0 mm; 0.0 * mm
On, Off *
1 hour * , 2 hours, 3 hours, 6 hours, 12 hours, 24
hours
Timeout (5 a 300 seconds), Off; 15
*
On, Off
*
Off , Collate, Rotate+Collate, Rotate+Group,
Offset+Collate, Offset+Group, Staple+Collate,
Staple+Group
Copies to Offset (Offset+Collate):
*
1 a 9999; 1
Staple Position (Staple+Collate):
Corner (Upper-L), Double (Top), Corner (Upper-R),
Double (Right), Corner (Lower-R), Double
(Bottom), Corner (Lower-L), Double (Left)
Staple Position (Staple+Group):
Grp Upp L-Corner, Grp Double(Top), Grp Upp
R-Corner, Grp Double(R), Grp Lwr R-Corner, Grp
Double(Btm), Grp Lwr L-Corner, Grp Double(L)
Off * , Top, Bottom, Left, Right
On, Off *
On, Off *
Off * , Auto, Correction Width (0.00 a 10.00 mm)
Off * , Blank, Printed
*
On, Off
*
5 Locations , Top Left, Bottom Left, Top Right,
Bottom Right, Full Surface
*
1 a 9999; 1
Descripción general de las opciones de impresora
Página
pág. 3-20
pág. 3-21
pág. 3-23
pág. 3-23
pág. 3-24
pág. 3-24
pág. 3-25
pág. 3-25
*
seconds pág. 3-26
pág. 3-26
pág. 3-27
pág. 3-32
pág. 3-33
pág. 3-34
pág. 3-35
pág. 3-36
pág. 3-37
pág. 3-38
pág. 3-38
3
3-5