Troubleshooting; Warranty; Ec Declaration Of Conformity; Environmentally-Friendly Disposal - Wolf Garten LYCOS E/280 T Manual De Instrucciones

Troubleshooting

Risk of injuries or material damage.
In case of doubt always consult a specialist workshop.
Before any inspection or any work on the device, switch the motor o and pull out the plug.
Problem Possible cause
Trimmer line spool is empty.
The cutting line has torn o and has been pulled
into the line spool.
Line adjustment
Cutting line has become caught in the spool.
does not work.
Cutting line is welded onto the spool.
No mains supply.
Cable damage:
Attention! Electric shock due to cable damage.
A fuse/circuit breaker will not always blow/trip if
Motor does not run.
the cable is cut through or damaged.
The trimmer starts
to vibrate exces- The drive is blocked or the bearing is defective.
sively.

Warranty

The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.

EC Declaration of Conformity

instruction manual.
Do not touch the cable before the mains plug
has been pulled out of the socket.
Troubleshooting
WARNING!

Environmentally-friendly disposal

Power tools, accessories and packaging must be
routed to an environmentally sound recycling chain.
-
-
Remedy
Replace the line spool.
Take o the line spool, if necessary wind
up the line again by gently pulling and
insert the spool.
Remove the welded on line section, if
necessary wind up the line again by
gently pulling and insert the spool.
Check the power supply and if necessary
contact an electrician to arrange repair.
Contact a specialist repair shop to ar-
range inspection and, if necessary, repair
of the grass trimmer.
Do not throw your old power tool away
with the domestic waste. Take it to a
disposal facility.
EN
23