Troubleshooting; Spare Parts And Accessories; Warranty - Wolf Garten GTB 36 Manual De Instrucciones

Troubleshooting

Troubleshooting
Problem
The unit switches
off.
The unit cannot
be switched on.
The automatic line
feed does not
function.
The line snaps
too frequently.
Charger:
No charging
process (red
continuous light).
Charger:
Fault
(red flashing light).
If in doubt, always visit a service centre. Before inspecting the lawn trimmer or working on the blade, always
switch it off and remove the battery.

Spare parts and accessories

Order no.
49ATS0-650
196-119-650
196-120-650
196-121-650
49ATW1-650
Delivery via your dealer

Warranty

The warranty regulations issued by our company or the importer are valid in all countries. Your unit will
be repaired free of charge under the warranty, provided the cause was a material or manufacturing fault.
In the event of a claim under the warranty, please contact your dealer or nearest branch office.
Operating instructions for lawn trimmer
All manuals and user guides at all-guides.com
Possible cause
The battery is too hot (over 45 ℃ ).
The battery is flat.
The battery is flat.
The battery is defective.
The spool is empty.
The toothing between the metal knob and
line spool is dirty.
The line has snapped and has been pulled
into the line spool.
The line has jammed on the spool.
The line has fused with the spool.
The spool is too dry.
The line comes into contact with fixed
objects, e.g. fences, trees, etc.
The contacts are dirty.
The battery has not been inserted
correctly.
The battery temperature is outside
5 °C to 45 °C.
The battery is defective.
Article designation
GT-F10
LI-ION POWER Pack ABP 36-03
LI-ION POWER Pack ABP 36-05
LI-ION POWER CHARGER ABC 36-03
GT-R
Remedial action
Leave the battery to cool down.
Recharge the battery.
Recharge the battery.
Replace the battery.
Replace the line spool.
Clean the parts with a brush.
Remove the line spool and, if required,
rewind the line applying light tension and
insert the spool.
Remove the fused part of the line and,
if required, rewind the line applying light
tension and insert the spool.
Place the spool in a container of water
for approx. 24 hours, dry and re-insert
the spool.
Use the plant guard.
Clean the contacts.
Insert the battery correctly into the battery
charger.
Leave the battery to cool down
or warm up.
Replace the battery.
Article description
Line spool
Battery 36 V/3 Ah
Battery 36 V/5 Ah
Rapid charger 36 V/3 A
Running wheel
English
19