Master MCI Manual De Uso Y Mantenimiento página 26

Assembling
Once the cleaning procedure has been completed, complete the assembly of the conveyor belt by following the
detailed instructions below. Remember that only authorized and trained personnel may perform this task.
1
image.
3
positioned in the central groove of the drive roller.
Position and secure the two heads of the drive roller using a No. 6 hex key, observing the distance shown in the following image. Later, the
5
26
2
drive roller are in their correct positions, as shown in the following
image. If not, it will be necessary to move them to the approximate
position indicated using a No. 6 hex
Place the drive roller as shown in the following image. Check
4
www.masterproducts.es