Cleaning Procedure; Important - Master MCI Manual De Uso Y Mantenimiento

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Cleaning Procedure

IMPORTANT: Maintenance work must always be done with the conveyor belt stopped and the electrical connector
disconnected. Always wear protective gloves for maintenance operations.
First, disconnect the conveyor belt from the electricity supply
1
Disassemble the hopper as shown in the following image by
3
loosening the four screws that secure it using a No. 2.5 hex key
Disassemble the two side protectors using a No. 6 hex key.
5
Remove the bolts, washers and nuts.
24
Disconnect the motor from the electrical box.
2
Disassemble the front protector as shown in the following
4
image by loosening the four screws that secure it using a
washers and nuts.
6
surface as shown in the following image. Using a No. 6 hex key,
remove the screws and washers holding the legs.
www.masterproducts.es

Capítulos

Tabla de contenido
loading

Tabla de contenido